An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be___________________?
The engine failure case for determining the basic runway length may require________________?
If the monthly mean of average daily temperature for the hottest month of the year is 25° C and the monthly mean of the maximum daily temperature of the same month of the year is 46° C, the airport reference temperature is____________________?
As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of__________________?
As per International Civil Aviation Organization (ICAO) recommendation, minimum width of safety area for instrumental runway should be_________________?
The minimum width of clearway is_______________?
The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be______________?
The capacity of parallel runway pattern depends upon______________?
As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are______________?
The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be________________?
Read More Section(Civil Engineering Mcqs)
Each Section contains maximum 70 questions. To get more questions visit other sections.
- Airport Engineering Mcqs - (41)
- Applied Mechanics & Graphic Statics Mcqs - (119)
- Building Materials & Construction Mcqs - (150)
- Construction Planning & Management Mcqs - (87)
- Design of Concrete Structures Mcqs - (136)
- Design of Masonry Structures Mcqs - (41)
- Design of Steel Structures Mcqs - (110)
- Dock & Harbor Engineering Mcqs - (35)
- Elements of Remote Sensing Mcqs - (67)
- Engineering Economy Mcqs - (198)
- Environmental Engineering Mcqs - (147)
- Estimating & Costing Mcqs - (88)
- Fluid Mechanics Mcqs - (97)
- Highway Engineering Mcqs - (129)
- Hydraulics & Fluid Mechanics Mcqs - (212)
- Irrigation, Water Resources Engineering & Hydrology Mcqs - (136)
- Railway Engineering Mcqs - (109)
- RCC Structures Design Mcqs - (227)
- Soil Mechanics & Foundation Engineering Mcqs - (117)
- Strength of Materials Mcqs - (98)
- Structural Analysis Mcqs - (53)
- Structural Design Specifications Mcqs - (8)
- Surveying Mcqs - (100)
- Theory of Structures Mcqs - (163)
- Tunnel Engineering Mcqs - (26)
- Waste Water Engineering Mcqs - (314)