RCC Structures Design Mcqs

1.

The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than_______________?

A. 18 bar diameters

B. 24 bar diameters

C. 30 bar diameters

D. 36 bar diameters

Answer & Solution Discuss in Board

2.

As the percentage of steel increases________________?

A. Depth of neutral axis decreases

B. Depth of neutral axis increases

C. Lever arm increases

D. Lever arm decreases

Answer & Solution Discuss in Board

3.

For a number of columns constructed in a rcjw, the type of foundation provided, is_______________?

A. Footing

B. Raft

C. Strap

D. Strip

Answer & Solution Discuss in Board

4.

If the modular ratio is , steel ratio is and overall depth of a beam is , the depth of the critical neutral axis of the beam, is___________________?

A. [m/(m – r)] d

B. [m/(m + r)] d

C. [(m + r)/ m] d

D. [(r – m)/m] d

Answer & Solution Discuss in Board

5.

In a simply supported slab, alternate bars are curtailed at________________?

A. 1/4th of the span

B. 1/5th of the span

C. 1/6th of the span

D. 1/7th of the span

Answer & Solution Discuss in Board

6.

Pick up the incorrect statement from the following_?

A. In the stem of a retaining wall, reinforcement is provided near the earth side

B. In the toe slab of a retaining wall, reinforcement is provided at the bottom of the slab

C. In the heel slab of a retaining wall, reinforcement is provided at the top of the slab

D. None of these

Answer & Solution Discuss in Board

7.

Pick up the correct statement from the following__?

A. Lateral reinforcement in R.C.C. columns is provided to prevent the longitudinal reinforcement from buckling

B. Lateral reinforcement prevents the shearing of concrete on diagonal plane

C. Lateral reinforcement stops breaking away of concrete cover, due to buckling

D. All the above

Answer & Solution Discuss in Board

Practice MCQ Questions and answers on RCC Structures Design Mcqs

1. The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than_______________?

Answer & Solution

2. As the percentage of steel increases________________?

Answer & Solution

3. For a number of columns constructed in a rcjw, the type of foundation provided, is_______________?

Answer & Solution

4. If the modular ratio is , steel ratio is and overall depth of a beam is , the depth of the critical neutral axis of the beam, is___________________?

Answer & Solution

5. In a simply supported slab, alternate bars are curtailed at________________?

Answer & Solution

6. Pick up the incorrect statement from the following_?

Answer & Solution

7. Pick up the correct statement from the following__?

Answer & Solution

Read More Section(Civil Engineering Mcqs)

1.

The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than_______________?

2.

As the percentage of steel increases________________?

3.

For a number of columns constructed in a rcjw, the type of foundation provided, is_______________?

4.

If the modular ratio is , steel ratio is and overall depth of a beam is , the depth of the critical neutral axis of the beam, is___________________?

5.

In a simply supported slab, alternate bars are curtailed at________________?

6.

Pick up the incorrect statement from the following_?

7.

Pick up the correct statement from the following__?