1.
Different grades are joined together by a ________________?
2.
If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant is_______________?
3.
If the intercept on a vertical staff is ob-served as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is________________?
4.
Overturning of vehicles on a curve can be avoided by using ________________?
5.
Subtense bar is an instrument used for _______________?
6.
The angle between the prolongation of the preceding line and the forward line of a traverse is called ________________?
7.
After fixing the plane table to the tripod, the main operations which are needed at each plane table station are ______________ ?
1. levelling
2. orientation
3. centering
The correct sequence of these operations is
1. levelling
2. orientation
3. centering
The correct sequence of these operations is
8.
The methods used for locating the plane table stations are_______________?
1. radiation
2. traversing
3.intersection
4. resection
The correct answer is
1. radiation
2. traversing
3.intersection
4. resection
The correct answer is
9.
In the cross-section method of indirect contouring, the spacing of cross-sections depends upon_____________?
1. contour interval
2. scale of plan
3. characteristics of ground
The correct answer is ?
1. contour interval
2. scale of plan
3. characteristics of ground
The correct answer is ?
10.
A metallic tape is made of ______________ ?
Read More Section(Civil Engineering Mcqs)
Each Section contains maximum 70 questions. To get more questions visit other sections.
- Airport Engineering Mcqs - (41)
- Applied Mechanics & Graphic Statics Mcqs - (119)
- Building Materials & Construction Mcqs - (150)
- Construction Planning & Management Mcqs - (87)
- Design of Concrete Structures Mcqs - (136)
- Design of Masonry Structures Mcqs - (41)
- Design of Steel Structures Mcqs - (110)
- Dock & Harbor Engineering Mcqs - (35)
- Elements of Remote Sensing Mcqs - (67)
- Engineering Economy Mcqs - (198)
- Environmental Engineering Mcqs - (147)
- Estimating & Costing Mcqs - (88)
- Fluid Mechanics Mcqs - (97)
- Highway Engineering Mcqs - (129)
- Hydraulics & Fluid Mechanics Mcqs - (212)
- Irrigation, Water Resources Engineering & Hydrology Mcqs - (136)
- Railway Engineering Mcqs - (109)
- RCC Structures Design Mcqs - (227)
- Soil Mechanics & Foundation Engineering Mcqs - (117)
- Strength of Materials Mcqs - (98)
- Structural Analysis Mcqs - (53)
- Structural Design Specifications Mcqs - (8)
- Surveying Mcqs - (100)
- Theory of Structures Mcqs - (163)
- Tunnel Engineering Mcqs - (26)
- Waste Water Engineering Mcqs - (314)